#include <qetdiagrameditor.h>

Inheritance diagram for QETDiagramEditor:

Collaboration diagram for QETDiagramEditor:

Public Slots
void	save ()
	QETDiagramEditor::save Ask the current active project to save.

void	saveAs ()
	QETDiagramEditor::saveAs Ask the current active project to save as.

bool	newProject ()
	QETDiagramEditor::newProject Create a new project with an empty diagram.

bool	openProject ()

bool	openRecentFile (const QString &)

bool	closeProject (ProjectView *)

bool	closeProject (QETProject *)

void	zoomGroupTriggered (QAction *action)

void	selectGroupTriggered (QAction *action)
	QETDiagramEditor::selectGroupTriggered This slot is called when selection need to change.

void	addItemGroupTriggered (QAction *action)
	QETDiagramEditor::addItemGroupTriggered This slot is called when an item must be added to the current diagram, this slot use the DVEventInterface to add item.

void	selectionGroupTriggered (QAction *action)
	QETDiagramEditor::selectionGroupTriggered This slot is called when an action should be made on the current selection.

void	rowColumnGroupTriggered (QAction *action)

void	slot_updateActions ()
	QETDiagramEditor::slot_updateActions Manage actions.

void	slot_updateUndoStack ()
	QETDiagramEditor::slot_updateUndoStack Update the undo stack view.

void	slot_updateModeActions ()
	QETDiagramEditor::slot_updateModeActions Manage action who need an opened diagram or project to be updated.

void	slot_updateComplexActions ()
	QETDiagramEditor::slot_updateComplexActions Manage the actions who need some conditions to be enable or not. This method does nothing if there is no project opened.

void	slot_updatePasteAction ()
	QETDiagramEditor::slot_updatePasteAction Gere les actions ayant besoin du presse-papier.

void	slot_updateWindowsMenu ()

void	slot_updateAutoNumDock ()
	QETDiagramEditor::slot_updateAutoNumDock Update Auto Num Dock Widget when changing Project.

void	generateTerminalBlock ()
	QETDiagramEditor::generateTerminalBlock.

void	setWindowedMode ()

void	setTabbedMode ()

void	readSettings ()
	QETDiagramEditor::readSettings Read the settings.

void	writeSettings ()
	QETDiagramEditor::writeSettings Write the settings.

void	activateProject (QETProject *)

void	activateProject (ProjectView *)

void	activateWidget (QWidget *)

void	projectWasClosed (ProjectView *)
	QETDiagramEditor::projectWasClosed Manage the close of a project.

void	editProjectProperties (ProjectView *)

void	editProjectProperties (QETProject *)

void	editDiagramProperties (DiagramView *)

void	editDiagramProperties (Diagram *)

void	addDiagramToProject (QETProject *)
	QETDiagramEditor::addDiagramToProject Add a diagram to project.

void	removeDiagram (Diagram *)

void	removeDiagramFromProject ()

void	moveDiagramUp (Diagram *)

void	moveDiagramDown (Diagram *)

void	moveDiagramUpTop (Diagram *)

void	moveDiagramUpx10 (Diagram *)

void	moveDiagramDownx10 (Diagram *)

void	reloadOldElementPanel ()

void	diagramWasAdded (DiagramView *)
	QETDiagramEditor::diagramWasAdded Manage the adding of diagram view in a project.

void	findElementInPanel (const ElementsLocation &)
	QETDiagramEditor::findElementInPanel Find the item for location in the element panel.

void	showError (const QETResult &)

void	showError (const QString &)

void	subWindowActivated (QMdiSubWindow *subWindows)
	QETDiagramEditor::subWindowActivated Slot used to update menu and undo stack when subwindows of MDIarea was activated.

Public Slots inherited from QETMainWindow
void	toggleFullScreen ()

void	updateFullScreenAction ()

void	checkToolbarsmenu ()

Public Member Functions
	QETDiagramEditor (const QStringList &=QStringList(), QWidget *=nullptr)
	QETDiagramEditor::QETDiagramEditor Constructor.

	~QETDiagramEditor () override

void	closeEvent (QCloseEvent *) override

QList< ProjectView * >	openedProjects () const

void	addProjectView (ProjectView *)
	QETDiagramEditor::addProjectView Add a new project view to workspace and build the connection between the projectview / project and this QETDiagramEditor.

bool	openAndAddProject (const QString &, bool=true)

QList< QString >	editedFiles () const

ProjectView *	viewForFile (const QString &) const

ProjectView *	currentProjectView () const

QETProject *	currentProject () const
	QETDiagramEditor::currentProject.

bool	drawGrid () const
	QETDiagramEditor::drawGrid.

void	openBackupFiles (QList< KAutoSaveFile * > backup_files)
	QETDiagramEditor::openBackupFiles.

Public Member Functions inherited from QETMainWindow
	QETMainWindow (QWidget *=nullptr, Qt::WindowFlags=Qt::Widget)

	~QETMainWindow () override

Public Attributes
QAction *	m_edit_diagram_properties
	Show a dialog to edit diagram properties.

QAction *	m_conductor_reset
	Reset paths of selected conductors.

QAction *	m_cut
	Cut selection to clipboard.

QAction *	m_copy
	Copy selection to clipboard.

QActionGroup	m_row_column_actions_group

QActionGroup	m_selection_actions_group
	Action related to add/remove rows/column in diagram.

QActionGroup *	m_depth_action_group = nullptr
	Action related to edit a selected item.

Protected Member Functions
bool	event (QEvent *) override
	QETDiagramEditor::event Reimplemented to : -Load elements collection when WindowActivate.

Protected Member Functions inherited from QETMainWindow
void	initCommonActions ()

void	initCommonMenus ()

void	insertMenu (QMenu , QMenu , bool=true)

QAction *	actionForMenu (QMenu *)

bool	event (QEvent *) override

void	dragEnterEvent (QDragEnterEvent *e) override

void	dropEvent (QDropEvent *e) override

virtual void	firstActivation (QEvent *)

Private Slots
void	selectionChanged ()
	QETDiagramEditor::selectionChanged This slot is called when a diagram selection was changed.

Private Member Functions
	QETDiagramEditor (const QETDiagramEditor &)

void	setUpElementsPanel ()
	QETDiagramEditor::setUpElementsPanel Setup the element panel and element panel widget.

void	setUpElementsCollectionWidget ()
	QETDiagramEditor::setUpElementsCollectionWidget Set up the dock widget of element collection.

void	setUpUndoStack ()
	QETDiagramEditor::setUpUndoStack Setup the undostack and undo stack widget.

void	setUpSelectionPropertiesEditor ()
	QETDiagramEditor::setUpSelectionPropertiesEditor Setup the dock for edit the current selection.

void	setUpAutonumberingWidget ()
	QETDiagramEditor::setUpAutonumberingWidget Setup the dock for AutoNumbering Selection.

void	setUpActions ()
	QETDiagramEditor::setUpActions Set up all Qaction.

void	setUpToolBar ()
	QETDiagramEditor::setUpToolBar.

void	setUpMenu ()
	QETDiagramEditor::setUpMenu.

bool	addProject (QETProject *, bool=true)

DiagramView *	currentDiagramView () const

Element *	currentElement () const

ProjectView *	findProject (DiagramView *) const

ProjectView *	findProject (Diagram *) const

ProjectView *	findProject (QETProject *) const

ProjectView *	findProject (const QString &) const

QMdiSubWindow *	subWindowForWidget (QWidget *) const

Private Attributes
QActionGroup *	grp_visu_sel
	Action group for visualisation vs edition mode.

QActionGroup *	m_group_view_mode
	Action group for project.

QActionGroup	m_add_item_actions_group

QActionGroup	m_zoom_actions_group
	Action related to adding (add text image shape...)

QActionGroup	m_select_actions_group
	Action related to zoom for diagram.

QActionGroup	m_file_actions_group
	Action related to global selections.

QAction *	m_tabbed_view_mode
	Actions related to file (open, close, save...)

QAction *	m_windowed_view_mode
	Display projects as windows.

QAction *	m_mode_selection
	Set edition mode.

QAction *	m_mode_visualise
	Set visualisation mode.

QAction *	m_export_to_images
	Export diagrams of the current project as imagess.

QAction *	m_export_to_pdf = nullptr
	Export project to pdf.

QAction *	m_print
	Print diagrams of the current project.

QAction *	m_quit_editor
	Quit the diagram editor.

QAction *	undo
	Cancel the latest action.

QAction *	redo
	Redo the latest cancelled operation.

QAction *	m_paste
	Paste clipboard content on the current diagram.

QAction *	m_auto_conductor
	Enable/Disable the use of auto conductor.

QAction *	conductor_default
	Show a dialog to edit default conductor properties.

QAction *	m_grey_background
	Switch the background color in white or grey.

QAction *	m_draw_grid
	Switch the background grid display or not.

QAction *	m_project_edit_properties
	Edit the properties of the current project.

QAction *	m_project_add_diagram
	Add a diagram to the current project.

QAction *	m_remove_diagram_from_project
	Delete a diagram from the current project.

QAction *	m_clean_project
	Clean the content of the current project by removing useless items.

QAction *	m_project_folio_list
	Sommaire des schemas.

QAction *	m_csv_export
	generate nomenclature

QAction *	m_add_nomenclature
	Add nomenclature graphics item;.

QAction *	m_add_summary
	Add summary graphics item.

QAction *	m_terminal_strip_dialog = nullptr
	Launch terminal strip dialog.

QAction *	m_project_terminalBloc
	generate terminal block

QAction *	m_project_export_conductor_num
	Export the wire num to csv.

QAction *	m_export_project_db

QAction *	m_tile_window
	Export to file the internal database of the current project.

QAction *	m_cascade_window
	Show MDI subwindows as cascade.

QAction *	m_previous_window
	Switch to the previous document.

QAction *	m_next_window
	Switch to the next document.

QAction *	m_edit_selection
	To edit selected item.

QAction *	m_delete_selection
	Delete selection.

QAction *	m_rotate_selection
	Rotate selected elements and text items by 90 degrees.

QAction *	m_rotate_texts
	Direct selected text items to a specific angle.

QAction *	m_find_element
	Find the selected element in the panel.

QAction *	m_group_selected_texts = nullptr

QAction *	m_close_file
	Close current project file.

QAction *	m_save_file
	Save current project.

QAction *	m_save_file_as
	Save current project as a specific file.

QAction *	m_find = nullptr

QList< QAction * >	m_zoom_action_toolBar

QMdiArea	m_workspace
	Only zoom action must displayed in the toolbar.

QSignalMapper	windowMapper

QDir	open_dialog_dir

QDockWidget *	qdw_pa
	Directory to use for file dialogs such as File > save.

QDockWidget *	m_qdw_elmt_collection
	Dock for the elements panel.

QDockWidget *	qdw_undo

ElementsCollectionWidget *	m_element_collection_widget
	Dock for the undo list.

DiagramPropertiesEditorDockWidget *	m_selection_properties_editor

ElementsPanelWidget *	pa
	Elements panel.

QMenu *	windows_menu

QToolBar *	main_tool_bar = nullptr

QToolBar *	view_tool_bar = nullptr

QToolBar *	diagram_tool_bar = nullptr

QToolBar *	m_add_item_tool_bar = nullptr

QToolBar *	m_depth_tool_bar = nullptr

QUndoGroup	undo_group

AutoNumberingDockWidget *	m_autonumbering_dock

int	activeSubWindowIndex

bool	m_first_show = true

SearchAndReplaceWidget	m_search_and_replace_widget

Additional Inherited Members
Protected Attributes inherited from QETMainWindow
QAction *	configure_action_
	Launch the QElectroTech configuration dialog.

QAction *	fullscreen_action_
	Toggle full screen.

QAction *	whatsthis_action_
	Toggle "What's this" mode.

QAction *	about_qet_
	Launch the "About QElectroTech" dialog.

QAction *	manual_online_
	Launch browser on QElectroTech online manual.

QAction *	youtube_
	Launch browser on QElectroTech Youtube channel.

QAction *	upgrade_
	Launch browser on QElectroTech Windows Nightly builds.

QAction *	upgrade_M
	Launch browser on QElectroTech MAC_OS_X builds.

QAction *	donate_
	Launch browser to donate link.

QAction *	about_qt_
	launch the "About Qt" dialog

QMenu *	settings_menu_
	Settings menu.

QMenu *	help_menu_
	Help menu.

QMenu *	display_toolbars_
	Show/hide toolbars/docks.

QHash< QMenu , QAction >	menu_actions_
	Store actions retrieved when inserting menus.

bool	first_activation_
	Used to detect whether the window is activated for the first time.

Detailed Description

This class represents the main window of the QElectroTech diagram editor and, ipso facto, the most important part of the QElectroTech user interface.

Constructor & Destructor Documentation

◆ QETDiagramEditor() [1/2]

QETDiagramEditor::QETDiagramEditor	(	const QStringList &	files = `QStringList()`,
		QWidget *	parent = `nullptr`
	)

QETDiagramEditor::QETDiagramEditor Constructor.

Parameters

files	: list of files to open
parent	: parent widget

Here is the call graph for this function:

◆ ~QETDiagramEditor()

QETDiagramEditor::~QETDiagramEditor ( )

override

Destructeur

◆ QETDiagramEditor() [2/2]

QETDiagramEditor::QETDiagramEditor ( const QETDiagramEditor & )

private

Member Function Documentation

◆ activateProject [1/2]

void QETDiagramEditor::activateProject ( ProjectView * project_view )

slot

Active le projet passe en parametre

Parameters

project_view Projet a activer

Here is the call graph for this function:

◆ activateProject [2/2]

void QETDiagramEditor::activateProject ( QETProject * project )

slot

Active le projet passe en parametre

Parameters

project Projet a activer

Here is the call graph for this function:

Here is the caller graph for this function:

◆ activateWidget

void QETDiagramEditor::activateWidget ( QWidget * widget )

slot

Parameters

widget Widget a activer

Here is the call graph for this function:

Here is the caller graph for this function:

◆ addDiagramToProject

void QETDiagramEditor::addDiagramToProject ( QETProject * project )

slot

QETDiagramEditor::addDiagramToProject Add a diagram to project.

Parameters

project

Here is the call graph for this function:

Here is the caller graph for this function:

◆ addItemGroupTriggered

void QETDiagramEditor::addItemGroupTriggered ( QAction * action )

slot

QETDiagramEditor::addItemGroupTriggered This slot is called when an item must be added to the current diagram, this slot use the DVEventInterface to add item.

Parameters

action : Action that describe the item to add.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ addProject()

bool QETDiagramEditor::addProject	(	QETProject *	project,
		bool	update_panel = `true`
	)

private

Ajoute un projetmoveDiagramUp(

Parameters

project	projet a ajouter
update_panel	Whether the elements panel should be warned this project has been added. Defaults to true.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ addProjectView()

void QETDiagramEditor::addProjectView ( ProjectView * project_view )

QETDiagramEditor::addProjectView Add a new project view to workspace and build the connection between the projectview / project and this QETDiagramEditor.

Parameters

project_view : project view to add

Here is the call graph for this function:

Here is the caller graph for this function:

◆ closeEvent()

void QETDiagramEditor::closeEvent ( QCloseEvent * qce )

override

Permet de quitter l'application lors de la fermeture de la fenetre principale

Parameters

qce	Le QCloseEvent correspondant a l'evenement de fermeture

Here is the call graph for this function:

◆ closeProject [1/2]

bool QETDiagramEditor::closeProject ( ProjectView * project_view )

slot

Ferme un projet

Parameters

project_view Projet a fermer

Returns: true si la fermeture du projet a reussi, false sinon Note : cette methode renvoie true si project est nul

Here is the call graph for this function:

Here is the caller graph for this function:

◆ closeProject [2/2]

bool QETDiagramEditor::closeProject ( QETProject * project )

slot

Ferme un projet

Parameters

project projet a fermer

Returns: true si la fermeture du fichier a reussi, false sinon Note : cette methode renvoie true si project est nul

Here is the call graph for this function:

◆ currentDiagramView()

DiagramView * QETDiagramEditor::currentDiagramView ( ) const

private

Returns: Le schema actuellement edite (= l'onglet ouvert dans le projet courant) ou 0 s'il n'y en a pas

Here is the call graph for this function:

Here is the caller graph for this function:

◆ currentElement()

Element * QETDiagramEditor::currentElement ( ) const

private

Returns: the selected element in the current diagram view, or 0 if: no diagram is being viewed in this editor. no element is selected more than one element is selected

Here is the call graph for this function:

Here is the caller graph for this function:

◆ currentProject()

QETProject * QETDiagramEditor::currentProject ( ) const

QETDiagramEditor::currentProject.

Returns: the current edited project. This function can return nullptr.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ currentProjectView()

ProjectView * QETDiagramEditor::currentProjectView ( ) const

Returns: Le projet actuellement edite (= qui a le focus dans l'interface MDI) ou 0 s'il n'y en a pas

Here is the caller graph for this function:

◆ diagramWasAdded

void QETDiagramEditor::diagramWasAdded ( DiagramView * dv )

slot

QETDiagramEditor::diagramWasAdded Manage the adding of diagram view in a project.

Parameters

dv	: added diagram view

Here is the call graph for this function:

Here is the caller graph for this function:

◆ drawGrid()

bool QETDiagramEditor::drawGrid ( ) const

QETDiagramEditor::drawGrid.

Returns: true if the grid of folio must be displayed

◆ editDiagramProperties [1/2]

void QETDiagramEditor::editDiagramProperties ( Diagram * diagram )

slot

Edite les proprietes du schema diagram

Parameters

diagram schema dont il faut editer les proprietes

Here is the call graph for this function:

◆ editDiagramProperties [2/2]

void QETDiagramEditor::editDiagramProperties ( DiagramView * diagram_view )

slot

Edite les proprietes du schema diagram

Parameters

diagram_view schema dont il faut editer les proprietes

Here is the call graph for this function:

Here is the caller graph for this function:

◆ editedFiles()

QList< QString > QETDiagramEditor::editedFiles ( ) const

Returns: la liste des fichiers edites par cet editeur de schemas

Here is the call graph for this function:

◆ editProjectProperties [1/2]

void QETDiagramEditor::editProjectProperties ( ProjectView * project_view )

slot

Edite les proprietes du projet project_view.

Parameters

project_view Vue sur le projet dont il faut editer les proprietes

Here is the call graph for this function:

Here is the caller graph for this function:

◆ editProjectProperties [2/2]

void QETDiagramEditor::editProjectProperties ( QETProject * project )

slot

Edite les proprietes du projet project.

Parameters

project Projet dont il faut editer les proprietes

Here is the call graph for this function:

◆ event()

bool QETDiagramEditor::event ( QEvent * e )

overrideprotected

QETDiagramEditor::event Reimplemented to : -Load elements collection when WindowActivate.

Parameters

e

Returns

Here is the call graph for this function:

◆ findElementInPanel

void QETDiagramEditor::findElementInPanel ( const ElementsLocation & location )

slot

QETDiagramEditor::findElementInPanel Find the item for location in the element panel.

Parameters

location

Here is the call graph for this function:

Here is the caller graph for this function:

◆ findProject() [1/4]

ProjectView * QETDiagramEditor::findProject ( const QString & filepath ) const

private

Parameters

filepath Chemin de fichier d'un projet

Returns: le ProjectView correspondant au chemin passe en parametre, ou 0 si celui-ci n'a pas ete trouve

Here is the call graph for this function:

◆ findProject() [2/4]

ProjectView * QETDiagramEditor::findProject ( Diagram * diagram ) const

private

Cette methode permet de retrouver le projet contenant un schema donne.

Parameters

diagram Schema dont il faut retrouver

Returns: la vue sur le projet contenant ce schema ou 0 s'il n'y en a pas

Here is the call graph for this function:

◆ findProject() [3/4]

ProjectView * QETDiagramEditor::findProject ( DiagramView * diagram_view ) const

private

Cette methode permet de retrouver le projet contenant un schema donne.

Parameters

diagram_view Schema dont il faut retrouver

Returns: la vue sur le projet contenant ce schema ou 0 s'il n'y en a pas

Here is the call graph for this function:

Here is the caller graph for this function:

◆ findProject() [4/4]

ProjectView * QETDiagramEditor::findProject ( QETProject * project ) const

private

Parameters

project Projet dont il faut trouver la vue

Returns: la vue du projet passe en parametre

Here is the call graph for this function:

◆ generateTerminalBlock

void QETDiagramEditor::generateTerminalBlock ( )

slot

QETDiagramEditor::generateTerminalBlock.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ moveDiagramDown

void QETDiagramEditor::moveDiagramDown ( Diagram * diagram )

slot

Change l'ordre des schemas d'un projet, en decalant le schema vers le bas / la droite

Parameters

diagram Schema a decaler vers le bas / la droite

Here is the call graph for this function:

Here is the caller graph for this function:

◆ moveDiagramDownx10

void QETDiagramEditor::moveDiagramDownx10 ( Diagram * diagram )

slot

Change l'ordre des schemas d'un projet, en decalant le schema vers le bas / la droite x10

Parameters

diagram Schema a decaler vers le bas / la droite x10

Here is the call graph for this function:

Here is the caller graph for this function:

◆ moveDiagramUp

void QETDiagramEditor::moveDiagramUp ( Diagram * diagram )

slot

Change l'ordre des schemas d'un projet, en decalant le schema vers le haut / la gauche

Parameters

diagram Schema a decaler vers le haut / la gauche

Here is the call graph for this function:

Here is the caller graph for this function:

◆ moveDiagramUpTop

void QETDiagramEditor::moveDiagramUpTop ( Diagram * diagram )

slot

Change l'ordre des schemas d'un projet, en decalant le schema vers le haut / la gauche en position 0

Parameters

diagram Schema a decaler vers le haut / la gauche en position 0

Here is the call graph for this function:

Here is the caller graph for this function:

◆ moveDiagramUpx10

void QETDiagramEditor::moveDiagramUpx10 ( Diagram * diagram )

slot

Change l'ordre des schemas d'un projet, en decalant le schema vers le haut / la gauche x10

Parameters

diagram Schema a decaler vers le haut / la gauche x10

Here is the call graph for this function:

Here is the caller graph for this function:

◆ newProject

bool QETDiagramEditor::newProject ( )

slot

QETDiagramEditor::newProject Create a new project with an empty diagram.

Returns

Here is the call graph for this function:

Here is the caller graph for this function:

◆ openAndAddProject()

bool QETDiagramEditor::openAndAddProject	(	const QString &	filepath,
		bool	interactive = `true`
	)

Ouvre un projet depuis un fichier et l'ajoute a cet editeur

Parameters

filepath	Chemin du projet a ouvrir
interactive	true pour afficher des messages a l'utilisateur, false sinon

Returns: true si l'ouverture a reussi, false sinon

Here is the call graph for this function:

Here is the caller graph for this function:

◆ openBackupFiles()

void QETDiagramEditor::openBackupFiles ( QList< KAutoSaveFile * > backup_files )

QETDiagramEditor::openBackupFiles.

Parameters

backup_files

Here is the call graph for this function:

Here is the caller graph for this function:

◆ openedProjects()

QList< ProjectView * > QETDiagramEditor::openedProjects ( ) const

Returns: la liste des projets ouverts dans cette fenetre

Here is the caller graph for this function:

◆ openProject

bool QETDiagramEditor::openProject ( )

slot

Cette fonction demande un nom de fichier a ouvrir a l'utilisateur

Returns: true si l'ouverture a reussi, false sinon

Here is the call graph for this function:

Here is the caller graph for this function:

◆ openRecentFile

bool QETDiagramEditor::openRecentFile ( const QString & filepath )

slot

Slot utilise pour ouvrir un fichier recent. Transfere filepath au slot openAndAddDiagram seulement si cet editeur est actif

Parameters

filepath Fichier a ouvrir

See also: openAndAddDiagram

Here is the call graph for this function:

Here is the caller graph for this function:

◆ projectWasClosed

void QETDiagramEditor::projectWasClosed ( ProjectView * project_view )

slot

QETDiagramEditor::projectWasClosed Manage the close of a project.

Parameters

project_view

Here is the call graph for this function:

Here is the caller graph for this function:

◆ readSettings

void QETDiagramEditor::readSettings ( )

slot

QETDiagramEditor::readSettings Read the settings.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ reloadOldElementPanel

void QETDiagramEditor::reloadOldElementPanel ( )

slot

Here is the call graph for this function:

◆ removeDiagram

void QETDiagramEditor::removeDiagram ( Diagram * diagram )

slot

Supprime un schema de son projet

Parameters

diagram Schema a supprimer

Here is the call graph for this function:

Here is the caller graph for this function:

◆ removeDiagramFromProject

void QETDiagramEditor::removeDiagramFromProject ( )

slot

Supprime le schema courant du projet courant

Here is the call graph for this function:

Here is the caller graph for this function:

◆ rowColumnGroupTriggered

void QETDiagramEditor::rowColumnGroupTriggered ( QAction * action )

slot

Here is the call graph for this function:

Here is the caller graph for this function:

◆ save

void QETDiagramEditor::save ( )

slot

QETDiagramEditor::save Ask the current active project to save.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ saveAs

void QETDiagramEditor::saveAs ( )

slot

QETDiagramEditor::saveAs Ask the current active project to save as.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ selectGroupTriggered

void QETDiagramEditor::selectGroupTriggered ( QAction * action )

slot

QETDiagramEditor::selectGroupTriggered This slot is called when selection need to change.

Parameters

action : Action that describes what to do.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ selectionChanged

void QETDiagramEditor::selectionChanged ( )

privateslot

QETDiagramEditor::selectionChanged This slot is called when a diagram selection was changed.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ selectionGroupTriggered

void QETDiagramEditor::selectionGroupTriggered ( QAction * action )

slot

QETDiagramEditor::selectionGroupTriggered This slot is called when an action should be made on the current selection.

Parameters

action : Action that describe the action to do.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setTabbedMode

void QETDiagramEditor::setTabbedMode ( )

slot

Affiche les projets dans des onglets.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setUpActions()

void QETDiagramEditor::setUpActions ( )

private

QETDiagramEditor::setUpActions Set up all Qaction.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setUpAutonumberingWidget()

void QETDiagramEditor::setUpAutonumberingWidget ( )

private

QETDiagramEditor::setUpAutonumberingWidget Setup the dock for AutoNumbering Selection.

Here is the caller graph for this function:

◆ setUpElementsCollectionWidget()

void QETDiagramEditor::setUpElementsCollectionWidget ( )

private

QETDiagramEditor::setUpElementsCollectionWidget Set up the dock widget of element collection.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setUpElementsPanel()

void QETDiagramEditor::setUpElementsPanel ( )

private

QETDiagramEditor::setUpElementsPanel Setup the element panel and element panel widget.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setUpMenu()

void QETDiagramEditor::setUpMenu ( )

private

QETDiagramEditor::setUpMenu.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setUpSelectionPropertiesEditor()

void QETDiagramEditor::setUpSelectionPropertiesEditor ( )

private

QETDiagramEditor::setUpSelectionPropertiesEditor Setup the dock for edit the current selection.

Here is the caller graph for this function:

◆ setUpToolBar()

void QETDiagramEditor::setUpToolBar ( )

private

QETDiagramEditor::setUpToolBar.

Here is the caller graph for this function:

◆ setUpUndoStack()

void QETDiagramEditor::setUpUndoStack ( )

private

QETDiagramEditor::setUpUndoStack Setup the undostack and undo stack widget.

Here is the caller graph for this function:

◆ setWindowedMode

void QETDiagramEditor::setWindowedMode ( )

slot

Affiche les projets dans des fenetres.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ showError [1/2]

void QETDiagramEditor::showError ( const QETResult & result )

slot

Show the error message contained in result.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ showError [2/2]

void QETDiagramEditor::showError ( const QString & error )

slot

Show the error message.

Here is the call graph for this function:

◆ slot_updateActions

void QETDiagramEditor::slot_updateActions ( )

slot

QETDiagramEditor::slot_updateActions Manage actions.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ slot_updateAutoNumDock

void QETDiagramEditor::slot_updateAutoNumDock ( )

slot

QETDiagramEditor::slot_updateAutoNumDock Update Auto Num Dock Widget when changing Project.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ slot_updateComplexActions

void QETDiagramEditor::slot_updateComplexActions ( )

slot

QETDiagramEditor::slot_updateComplexActions Manage the actions who need some conditions to be enable or not. This method does nothing if there is no project opened.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ slot_updateModeActions

void QETDiagramEditor::slot_updateModeActions ( )

slot

QETDiagramEditor::slot_updateModeActions Manage action who need an opened diagram or project to be updated.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ slot_updatePasteAction

void QETDiagramEditor::slot_updatePasteAction ( )

slot

QETDiagramEditor::slot_updatePasteAction Gere les actions ayant besoin du presse-papier.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ slot_updateUndoStack

void QETDiagramEditor::slot_updateUndoStack ( )

slot

QETDiagramEditor::slot_updateUndoStack Update the undo stack view.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ slot_updateWindowsMenu

void QETDiagramEditor::slot_updateWindowsMenu ( )

slot

met a jour le menu "Fenetres"

Here is the call graph for this function:

Here is the caller graph for this function:

◆ subWindowActivated

void QETDiagramEditor::subWindowActivated ( QMdiSubWindow * subWindows )

slot

QETDiagramEditor::subWindowActivated Slot used to update menu and undo stack when subwindows of MDIarea was activated.

Parameters

subWindows

Here is the call graph for this function:

Here is the caller graph for this function:

◆ subWindowForWidget()

QMdiSubWindow * QETDiagramEditor::subWindowForWidget ( QWidget * widget ) const

private

Parameters

widget Widget a rechercher dans la zone MDI

Returns: La sous-fenetre accueillant le widget passe en parametre, ou 0 si celui-ci n'a pas ete trouve.

Here is the caller graph for this function:

◆ viewForFile()

ProjectView * QETDiagramEditor::viewForFile ( const QString & filepath ) const

Parameters

filepath Un chemin de fichier Note : si filepath est une chaine vide, cette methode retourne 0.

Returns: le ProjectView editant le fichier filepath, ou 0 si ce fichier n'est pas edite par cet editeur de schemas.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ writeSettings

void QETDiagramEditor::writeSettings ( )

slot

QETDiagramEditor::writeSettings Write the settings.

Here is the caller graph for this function:

◆ zoomGroupTriggered

void QETDiagramEditor::zoomGroupTriggered ( QAction * action )

slot

Here is the call graph for this function:

Here is the caller graph for this function:

Member Data Documentation

◆ activeSubWindowIndex

int QETDiagramEditor::activeSubWindowIndex

private

◆ conductor_default

QAction * QETDiagramEditor::conductor_default

private

Show a dialog to edit default conductor properties.

◆ diagram_tool_bar

QToolBar * QETDiagramEditor::diagram_tool_bar = nullptr

private

◆ grp_visu_sel

QActionGroup* QETDiagramEditor::grp_visu_sel

private

Action group for visualisation vs edition mode.

◆ m_add_item_actions_group

QActionGroup QETDiagramEditor::m_add_item_actions_group

private

◆ m_add_item_tool_bar

QToolBar * QETDiagramEditor::m_add_item_tool_bar = nullptr

private

◆ m_add_nomenclature

QAction * QETDiagramEditor::m_add_nomenclature

private

Add nomenclature graphics item;.

◆ m_add_summary

QAction * QETDiagramEditor::m_add_summary

private

Add summary graphics item.

◆ m_auto_conductor

QAction * QETDiagramEditor::m_auto_conductor

private

Enable/Disable the use of auto conductor.

◆ m_autonumbering_dock

AutoNumberingDockWidget* QETDiagramEditor::m_autonumbering_dock

private

◆ m_cascade_window

QAction * QETDiagramEditor::m_cascade_window

private

Show MDI subwindows as cascade.

◆ m_clean_project

QAction * QETDiagramEditor::m_clean_project

private

Clean the content of the current project by removing useless items.

◆ m_close_file

QAction * QETDiagramEditor::m_close_file

private

Close current project file.

◆ m_conductor_reset

QAction * QETDiagramEditor::m_conductor_reset

Reset paths of selected conductors.

◆ m_copy

QAction * QETDiagramEditor::m_copy

Copy selection to clipboard.

◆ m_csv_export

QAction * QETDiagramEditor::m_csv_export

private

generate nomenclature

◆ m_cut

QAction * QETDiagramEditor::m_cut

Cut selection to clipboard.

◆ m_delete_selection

QAction * QETDiagramEditor::m_delete_selection

private

Delete selection.

◆ m_depth_action_group

QActionGroup * QETDiagramEditor::m_depth_action_group = nullptr

Action related to edit a selected item.

◆ m_depth_tool_bar

QToolBar * QETDiagramEditor::m_depth_tool_bar = nullptr

private

◆ m_draw_grid

QAction * QETDiagramEditor::m_draw_grid

private

Switch the background grid display or not.

◆ m_edit_diagram_properties

QAction* QETDiagramEditor::m_edit_diagram_properties

Show a dialog to edit diagram properties.

◆ m_edit_selection

QAction * QETDiagramEditor::m_edit_selection

private

To edit selected item.

◆ m_element_collection_widget

ElementsCollectionWidget* QETDiagramEditor::m_element_collection_widget

private

Dock for the undo list.

◆ m_export_project_db

QAction * QETDiagramEditor::m_export_project_db

private

◆ m_export_to_images

QAction * QETDiagramEditor::m_export_to_images

private

Export diagrams of the current project as imagess.

◆ m_export_to_pdf

QAction * QETDiagramEditor::m_export_to_pdf = nullptr

private

Export project to pdf.

◆ m_file_actions_group

QActionGroup QETDiagramEditor::m_file_actions_group

private

Action related to global selections.

◆ m_find

QAction * QETDiagramEditor::m_find = nullptr

private

◆ m_find_element

QAction * QETDiagramEditor::m_find_element

private

Find the selected element in the panel.

◆ m_first_show

bool QETDiagramEditor::m_first_show = true

private

◆ m_grey_background

QAction * QETDiagramEditor::m_grey_background

private

Switch the background color in white or grey.

◆ m_group_selected_texts

QAction * QETDiagramEditor::m_group_selected_texts = nullptr

private

◆ m_group_view_mode

QActionGroup * QETDiagramEditor::m_group_view_mode

private

Action group for project.

◆ m_mode_selection

QAction * QETDiagramEditor::m_mode_selection

private

Set edition mode.

◆ m_mode_visualise

QAction * QETDiagramEditor::m_mode_visualise

private

Set visualisation mode.

◆ m_next_window

QAction * QETDiagramEditor::m_next_window

private

Switch to the next document.

◆ m_paste

QAction * QETDiagramEditor::m_paste

private

Paste clipboard content on the current diagram.

◆ m_previous_window

QAction * QETDiagramEditor::m_previous_window

private

Switch to the previous document.

◆ m_print

QAction * QETDiagramEditor::m_print

private

Print diagrams of the current project.

◆ m_project_add_diagram

QAction * QETDiagramEditor::m_project_add_diagram

private

Add a diagram to the current project.

◆ m_project_edit_properties

QAction * QETDiagramEditor::m_project_edit_properties

private

Edit the properties of the current project.

◆ m_project_export_conductor_num

QAction * QETDiagramEditor::m_project_export_conductor_num

private

Export the wire num to csv.

◆ m_project_folio_list

QAction * QETDiagramEditor::m_project_folio_list

private

Sommaire des schemas.

◆ m_project_terminalBloc

QAction * QETDiagramEditor::m_project_terminalBloc

private

generate terminal block

◆ m_qdw_elmt_collection

QDockWidget * QETDiagramEditor::m_qdw_elmt_collection

private

Dock for the elements panel.

◆ m_quit_editor

QAction * QETDiagramEditor::m_quit_editor

private

Quit the diagram editor.

◆ m_remove_diagram_from_project

QAction * QETDiagramEditor::m_remove_diagram_from_project

private

Delete a diagram from the current project.

◆ m_rotate_selection

QAction * QETDiagramEditor::m_rotate_selection

private

Rotate selected elements and text items by 90 degrees.

◆ m_rotate_texts

QAction * QETDiagramEditor::m_rotate_texts

private

Direct selected text items to a specific angle.

◆ m_row_column_actions_group

QActionGroup QETDiagramEditor::m_row_column_actions_group

◆ m_save_file

QAction * QETDiagramEditor::m_save_file

private

Save current project.

◆ m_save_file_as

QAction * QETDiagramEditor::m_save_file_as

private

Save current project as a specific file.

◆ m_search_and_replace_widget

SearchAndReplaceWidget QETDiagramEditor::m_search_and_replace_widget

private

◆ m_select_actions_group

QActionGroup QETDiagramEditor::m_select_actions_group

private

Action related to zoom for diagram.

◆ m_selection_actions_group

QActionGroup QETDiagramEditor::m_selection_actions_group

Action related to add/remove rows/column in diagram.

◆ m_selection_properties_editor

DiagramPropertiesEditorDockWidget* QETDiagramEditor::m_selection_properties_editor

private

◆ m_tabbed_view_mode

QAction* QETDiagramEditor::m_tabbed_view_mode

private

Actions related to file (open, close, save...)

Display projects as tabs

◆ m_terminal_strip_dialog

QAction * QETDiagramEditor::m_terminal_strip_dialog = nullptr

private

Launch terminal strip dialog.

◆ m_tile_window

QAction * QETDiagramEditor::m_tile_window

private

Export to file the internal database of the current project.

Show MDI subwindows as tile

◆ m_windowed_view_mode

QAction * QETDiagramEditor::m_windowed_view_mode

private

Display projects as windows.

◆ m_workspace

QMdiArea QETDiagramEditor::m_workspace

private

Only zoom action must displayed in the toolbar.

◆ m_zoom_action_toolBar

QList<QAction *> QETDiagramEditor::m_zoom_action_toolBar

private

◆ m_zoom_actions_group

QActionGroup QETDiagramEditor::m_zoom_actions_group

private

Action related to adding (add text image shape...)

◆ main_tool_bar

QToolBar* QETDiagramEditor::main_tool_bar = nullptr

private

◆ open_dialog_dir

QDir QETDiagramEditor::open_dialog_dir

private

◆ pa

ElementsPanelWidget* QETDiagramEditor::pa

private

Elements panel.

◆ qdw_pa

QDockWidget* QETDiagramEditor::qdw_pa

private

Directory to use for file dialogs such as File > save.

◆ qdw_undo

QDockWidget * QETDiagramEditor::qdw_undo

private

◆ redo

QAction * QETDiagramEditor::redo

private

Redo the latest cancelled operation.

◆ undo

QAction * QETDiagramEditor::undo

private

Cancel the latest action.

◆ undo_group

QUndoGroup QETDiagramEditor::undo_group

private

◆ view_tool_bar

QToolBar * QETDiagramEditor::view_tool_bar = nullptr

private

◆ windowMapper

QSignalMapper QETDiagramEditor::windowMapper

private

◆ windows_menu

QMenu* QETDiagramEditor::windows_menu

private

The documentation for this class was generated from the following files:

sources/qetdiagrameditor.h
sources/qetdiagrameditor.cpp

Public Slots

Public Member Functions

Public Attributes

Protected Member Functions

Private Slots

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ QETDiagramEditor() [1/2]

◆ ~QETDiagramEditor()

◆ QETDiagramEditor() [2/2]

Member Function Documentation

◆ activateProject [1/2]

◆ activateProject [2/2]

◆ activateWidget

◆ addDiagramToProject

◆ addItemGroupTriggered

◆ addProject()

◆ addProjectView()

◆ closeEvent()

◆ closeProject [1/2]

◆ closeProject [2/2]

◆ currentDiagramView()

◆ currentElement()

◆ currentProject()

◆ currentProjectView()

◆ diagramWasAdded

◆ drawGrid()

◆ editDiagramProperties [1/2]

◆ editDiagramProperties [2/2]

◆ editedFiles()

◆ editProjectProperties [1/2]

◆ editProjectProperties [2/2]

◆ event()

◆ findElementInPanel

◆ findProject() [1/4]

◆ findProject() [2/4]

◆ findProject() [3/4]

◆ findProject() [4/4]

◆ generateTerminalBlock

◆ moveDiagramDown

◆ moveDiagramDownx10

◆ moveDiagramUp

◆ moveDiagramUpTop

◆ moveDiagramUpx10

◆ newProject

◆ openAndAddProject()

◆ openBackupFiles()

◆ openedProjects()

◆ openProject

◆ openRecentFile

◆ projectWasClosed

◆ readSettings

◆ reloadOldElementPanel

◆ removeDiagram

◆ removeDiagramFromProject

◆ rowColumnGroupTriggered

◆ save

◆ saveAs

◆ selectGroupTriggered

◆ selectionChanged

◆ selectionGroupTriggered

◆ setTabbedMode

◆ setUpActions()

◆ setUpAutonumberingWidget()

◆ setUpElementsCollectionWidget()

◆ setUpElementsPanel()

◆ setUpMenu()

◆ setUpSelectionPropertiesEditor()

◆ setUpToolBar()

◆ setUpUndoStack()

◆ setWindowedMode

◆ showError [1/2]

◆ showError [2/2]

◆ slot_updateActions

◆ slot_updateAutoNumDock

◆ slot_updateComplexActions

◆ slot_updateModeActions